Fiddes Exterior Coloured Wood Protector


Free Shipping

  • 5 Litre tins – Coloured exterior wood protector
  • Weather and water resistent
  • UV Protective
SKU: DANISH-1-1 Category:


Fiddes Exterior  Coloured Wood Protector is a solvent based water repelling preservative sealer. Unlike surface oils, it will penetrate deep into exterior timbers – both rough sawn and planed smooth wood.

These coloured exterior wood protectors preserve and protect a variety of woods including larch and cedar, prevent algae from growing on the surface of the wood and offer a high resistance to water penetration with excellent beading.

Available in a range of colours and a transparent finish, and containing UV filters to resist colour fade.

Ideal for Sheds, Fences and timber joinery, however not suitable for use on decking or garden furniture or in areas subjected to high wear or footfall.

A single applicatopm will cover approximately 25-30 square metres per litre (125 – 150 square metres per tin), depending on the density of the substrate.

Please see ‘Application Guidelines’ tab above for more information.


On all new timber, coat thoroughly to seal.
Longer drying periods may occur during application in cold, damp or humid conditions.
3 coats recommended on softwood.
Clean applicators with white spirit

Application Guidelines

PREPARATION Ensure all surfaces are clean, dry, and free from any previous finish.

Remove any fungal growth, dirt or moss on old wood prior to application

Sand the substrate with a medium 120 grade sanding paper, removing all traces of dust.

APPLICATION Apply in dry conditions.
Always test on a small area prior to initial application to check colour shade. Apply with brush or solvent resistant, low pressure garden sprayer, ideally in still conditions if spraying.
FIRST COAT Stir contents thoroughly before and during use. Apply consistently using a good quality bristle or synthetic brush and lay evenly, following the direction of the grain. Leave to dry 12 hours or preferably overnight.
SECOND COAT Apply as first coat. Leave to dry 12 hours or preferably overnight.
THIRD COAT Apply as above. Clean applicators with White Spirit.
COVERAGE A single application will approximately cover 25-30 square meters per litre, depending on density of substrate.
AVAILABLE TINTS Clear, Harvest Brown, Fern Green, Chestnut, Cedar, Dark Oak


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.