Guides
Oak Beam T-Type Bracket Installation
T-Type Bracket Installation What you will need: Spirit level, 2x Screws per bracket, Screwdriver, Drill, 10mm drill bit, 12mm drill bit, pencil Step 1.Using a spirit level draw a straight level line on your wall where you intend the shelf/beam to hang – Draw the line the same length as the shelf and mark the centre point (this will be the centre of your beam). Step 2.Fixing to a stud work wall:If you’re fixing to a stud work wall it is important to find the uprights/noggins behind the plasterboard and get as many fixings as possible into the stud work...